Causes of dryer fires?
One of the most common causes of dryer fires is lack of maintenance. When lint traps do not get cleaned as often as they should be, the resulting build-up in the screen or other areas can cause the dryer to perform poorly, operate at elevated temperatures and possibly overheat with dangerous results. Vent systems must also be checked and cleaned to maintain proper air flow for the same reasons. The floor area surrounding the dryer must be lint, dirt, and clothes free. A lint ball, sock or clothing item can easily be sucked from the floor in front or beside your dryer into the heating coils igniting it and the lint in your dryer vents.
Problems also occur when people place improper items in their dryers, such as foam backed rugs or athletic shoes. Ensure whatever you put in your dryer is approved and safe to place in a dryer. When in doubt, check the washing instructions on the tag of the clothing or consult the manufacturer’s website for more information. Plastic or vinyl exhaust vent materials should never be used.
Reduce your risk of dryer fires!
Ensure that your dryer has rigid or flexible metal venting and ducting materials to help sustain airflow. This will also reduce operating costs and extend the life of the dryer and clothing due to lower drying temperatures.
In addition:
- Clean the lint trap before or after drying each load of clothes.
- Don’t forget to clean the back of the dryer where lint can be trapped.
- Ensure the floor around your dryer is free of debris, lint and clothing.
- The interior of the dryer and venting system should be cleaned periodically by qualified service technician. If drying time is longer than normal, clean the vent system thoroughly to ensure proper airflow.
- Replace plastic or vinyl exhaust hoses with rigid or flexible metal venting.
- Do not dry clothes or fabric on which there is anything flammable (alcohol, cooking oils, gasoline, spot removers, dry-cleaning solvents, etc.). Flammable substances give off vapors that could ignite or explode.
- Gasoline should not be stored near dryers or water heaters and should only be stored in approved containers.
- Read manufacturers’ warnings in use and care manuals that accompany new dryers. Warnings can usually be found on the inside of the dryer’s lid and take only minutes to read.
Did you know that?
- Clothes dryers can be found in 80 percent, or 81.5 million homes throughout the United States.
- A full load of wet clothes placed in a dryer contains about one half gallon of water. Lint is created from the clothes as water is removed.
- Clothes dryers are one of the most expensive appliances in your home to operate. The longer it runs the more money it costs you.
- The U.S. Consumer Product Safety Commission (CPSC) estimates that 15,500 fires associated with clothes dryers occur annually. These fires account for an average of 10 deaths and 310 injuries and more than $84.4 million in property damage annually.
Frank Carr is the Owner / Inspector at First Choice Home
Inspections in Deltona, FL serving Volusia, Seminole, Orange and Lake
Counties. Formerly in the building trades, Frank’s focus is a safe home
in the Orlando Metro and Daytona Beach areas of Central Florida and building FCHI. We believe that consumers have the right to expect
the highest standards of thoroughness, fairness and effectiveness from
their home inspector and that is exactly what we provide.
First Choice Home Inspections
Residential Home Inspections in Central Florida
(386) 624-3893
Website: http://1homeinspector.com
Twitter: https://twitter.com/1stChoiceHomeIn
This comment has been removed by the author.
ReplyDeleteI had hired Manhattan Beach Home Inspector Service to inspect my home and he really helped us by telling many invisible flaws of our home. He satisfied me with his services.
ReplyDeleteI have had a lot of clogged roof dryer ducts lately and the main problem have been the screens on the goose neck vents. According to the IRC:
ReplyDelete- M1502.3 Duct termination.
- - Exhaust ducts shall terminate on the outside of the building. Exhaust duct terminations shall be in accordance with the dryer manufacturer’s installation instructions. If the manufacturer’s instructions do not specify a termination location, the exhaust duct shall terminate not less than 3 feet (914 mm) in any direction from openings into buildings. Exhaust duct terminations shall be equipped with a backdraft damper. Screens shall not be installed at the duct termination.
Screens have all been clogged on all goose neck vents. Recommend cleaning dryer vent and installing appropriate dryer vent duct. Safety Hazard